11 24 Connecting Rods And Bearings
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | S85 | M9x1 | Replace screws Screws washed and oiled |
|
| 1. Jointing torque | 6 Nm | |||
| 2. Setting torque | 20 Nm | |||
| 3. Angle of rotation | 130 ° | |||
|
IMPORTANT:
release connecting rod bolts.
|
||||
| 4. Jointing torque | 6 Nm | |||
| 5. Setting torque | 20 Nm | |||
| Angle of rotation | 130 ° | |||
|
IMPORTANT:
release connecting rod bolts.
|
||||
| 6. Jointing torque | 6 Nm | |||
| 7. Setting torque | 20 Nm | |||
| 8. Angle of rotation | 130 ° |