LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 525i Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Seats - Repair) >> Front seat, comfort >> 52 17 034 Removing And Installing/Replacing Shaft For Headrest Adjustment (Comfort Seat)

52 17 034 Removing And Installing/Replacing Shaft For Headrest Adjustment (Comfort Seat)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Headrest must be moved as far forwards as possible.
  2. Remove rear panel at top.
  3. Remove rear panel at bottom.

Withdraw shaft in succession from gear and drive.

Installation: 

Carry out function check.

Fig 1: Removing Shaft
G03268668Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals