LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 525i Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 115 Removing and installing/replacing striker for rear lid upper section

51 24 115 Removing and installing/replacing striker for rear lid upper section

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove trim for rear lid lower section. Refer to 51 49 090 REMOVING AND INSTALLING/REPLACING TRIM FOR REAR LID LOWER SECTION .

Release screws (1) and remove striker (2).

Fig 1: Removing Striker
G03268269Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Adjust rear lid latch (striker) for upper section of rear lid lock. Refer to 41 62 030 Fitting rear lid upper section .

CAUTION: Closing bracket and rear lid lock must not be greased.