LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 525i Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 395 (Steering And Wheel Alignment - Repair) >> steering wheel >> 32 33 000 Removing And Installing/Replacing Steering Wheel (Basic Steering Wheel)

32 33 000 Removing And Installing/Replacing Steering Wheel (Basic Steering Wheel)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unscrew screw.

Fig 1: Removing Steering Wheel
G03267855Courtesy of BMW OF NORTH AMERICA, INC.

Tightening torque, 32 33 1AZ. Refer to STEERING AND WHEEL ALIGNMENT - TIGHTENING TORQUES .

Remove steering wheel.

Installation: 

Move wheels to straight-ahead position.

Fit steering wheel. Markings on steering wheel and steering spindle must match up. The retaining pins must also appear in the openings in the steering wheel.

Fig 2: Installing Steering Wheel
G03267856Courtesy of BMW OF NORTH AMERICA, INC.