12 52 005 Removing and installing/replacing integrated supply module (N62)
WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Switch off ignition
- Follow instructions for disconnecting and connecting battery
Disconnect battery
- Remove microfilter housing cover. See CABIN AIR FILTER .
IMPORTANT:
Follow instructions for removing and installing electronic control units.
Release lock (1).
Remove air funnel (2) towards top.