11 62 060 Removing and installing/replacing left exhaust manifold (M62/N62)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

(Cylinder bank 5 to 8)

Necessary preliminary tasks:

Remove reinforcement plate.
Remove exhaust system.
Remove front propeller

NOTE: Illustration with engine removed.

Release screw connection at exhaust manifold.

Feed out exhaust manifold towards bottom.

Fig 1: Removing Exhaust Manifold

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace seals.
Beads of seals face the exhaust manifold.
Coat thread with copper paste (CRC).
Replace nuts.

Tightening torque, see ENGINE - TIGHTENING TORQUES .

Fig 2: Identifying Seals

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check exhaust system for leaks.