33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right

WARNING: This page is about a different car, the 2010 BMW 528i, 2009 BMW 528i, and 2008 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.

Release nut (1); if necessary, grip at Torx socket. Installation note: Replace self-locking nut. Tightening torque 33 55 2AZ, see 55 STABILIZER BAR .

Fig 1: Identifying Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (2); if necessary, grip at Torx socket. Remove anti-roll bar link.

Installation note: Replace self-locking nut. Tightening torque 33 55 2AZ, see 55 STABILIZER BAR .