51 22 302 Removing and Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left or Right
WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 311
Stick adhesive tape (2) below window cavity cover strip (1) (risk of damage).
Using special tool 00 9 311 (starting at front and proceeding to rear), lever out window cavity cover strip (1).
Installation:
Moisten window cavity cover strip (1) with water.
Window cavity cover strip (1) must be flush at front and rear with door edge.
Installation:
Seal (1) must be correctly fitted in chrome strip (2).
Initialize power window. See 67 62 ... NOTES ON INITIALIZING POWER WINDOW