61 31 220 Removing and Installing/Replacing Multifunction Steering Wheel Switches (Sport Steering Wheel, From 09/2005)
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove airbag unit . See 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT
Release screws (1).
IMPORTANT:
Risk of breakage!
Lever out switches (2) complete with decorative strip (3) all round, do not tilt!
Disconnect associated plug connections and remove switches (2) complete with decorative strip (3).
Installation:
Make sure electrical leads are correctly routed.
Release screws (2) and remove left multifunction steering wheel switches (3) from decorative strip (1).
Installation:
Guide pins (4) must not be damaged and must be correctly inserted.
Make sure there is a uniform gap between both multifunction steering wheel switches (3) and decorative strip (1).