LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 525i Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> Side Covering With Armrests >> 51 43 251 Removing and installing/replacing trim for rear left or right roof pillar (rear)

51 43 251 Removing and installing/replacing trim for rear left or right roof pillar (rear)

WARNING: Follow SAFETY INSTRUCTIONS  for working on cars with airbag systems.
IMPORTANT: Do not use any sharp-edged tools to remove trim (risk of damage to head airbag).

Lever out airbag emblem (1) and release screw underneath.

Fig 1: Removing Airbag Emblem And Releasing Screw Underneath
G03261726Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Tightening torque see 1AZ in 51 43 SIDE TRIM PANEL WITH ARMRESTS .

Unclip clip (3) and clips (4) of trim (2) and pull out trim (2) inwards and upwards.

Installation: 

Retainer (1) on trim (2) must not be damaged or missing.

Fig 2: Installing Retainer On Trim
G03261727Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of trim (4) must not be damaged or missing:

  1. Clip
  2. Guide
  3. Clips
Fig 3: Identifying Trim (4), Clip (1), Guide (2) And Clips (3)
G03261728Courtesy of BMW OF NORTH AMERICA, INC.