51 49 000 Removing and installing or replacing trim for rear lid

Necessary preliminary tasks:

Version with manual rear lid unlocking:

Detach handle (1) from clip (2).

Disconnect Bowden cable (3) from handle (1).

Installation:

Guide Bowden cable (3) through clip (2) and connect correctly in handle (1).

Fig 1: Disconnecting Bowden Cable From Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Remove screws (1) and (2).

Lever out retaining strap and detach tool kit (3).

Fig 2: Removing Retaining Strap And Detach Tool Kit

Courtesy of BMW OF NORTH AMERICA, INC.

Release expansion rivets (1) on left and right.

Remove trim (2).

Fig 3: Removing Expansion Rivets On Left And Right

Courtesy of BMW OF NORTH AMERICA, INC.