51 16 045 Removing and installing/replacing retaining ring on left or right door mirror

Necessary preliminary tasks: 

• Remove HOUSING ON DOOR MIRROR .
• Remove DRIVE FOR ELECTRICALLY ADJUSTABLE DOOR MIRROR .

Disconnect plug connection (1).

Release screws (2) and remove complete retaining ring on door mirror (3) from carrier (4).

Installation: 

Version with door mirror light:

Ensure correct cable routing.

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip retaining ring on door mirror (1) with special tool 64 1 020 all round and remove from retaining plate (2).

Fig 2: Removing Retaining Ring Clip On Door Mirror

Courtesy of BMW OF NORTH AMERICA, INC.