51 16 214 Removing and installing/replacing trim for selector lever (M5)

Lever out gaiter (1) at catches (2).

Fig 1: Identifying Gaiter And Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Reach into trim (1) and unclip upwards from retainers (2).

Fig 2: Identifying Retainers And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Risk of damage!

Gaiter (1) can be damaged on trim (2) when fed out.

Press gaiter (1) together slightly and feed out through trim (2).

Fig 3: Identifying Gaiter And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1 and 2).

Remove finisher strip (3).

Installation:

Plug connection (2) must be correctly clipped into trim (3).

Fig 4: Identifying Trim Strip And Connectors

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Felt strip (1) must not be missing or damaged.

Replacement:

Fig 5: Identifying Felt Strip And Switches

Courtesy of BMW OF NORTH AMERICA, INC.