61 31 033 Removing and installing light switch unit

Unclip left wooden finisher,

refer to 51 16 221 REPLACING A CLIPPED-IN TRIM (DECORATIVE STRIP ON PANEL FOR INSTRUMENT PANEL, FRONT OR REAR DOOR) .

Remove left glove box, refer to 51 16 350 REMOVING AND INSTALLING LEFT GLOVE BOX .

Release screws (1).

Fig 1: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Press switch unit up a little through glove box aperture and then slide back.

Fig 2: Pressing Switch Unit Up A Little Through Glove Box Aperture

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug and remove.

Fig 3: Removing Plug

Courtesy of BMW OF NORTH AMERICA, INC.