65 52 020 Replacing trim panel for on-board monitor (control panel)

Remove and install complete onboard monitor, refer to 65 52 010 REMOVING AND INSTALLING ON-BOARD MONITOR .

Release screws (1) and tilt trim panel out from above.

Fig 1: Release Screws (1)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove LC display.

Fig 2: Removing LC Display

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Lay wire (1) downwards.

Fig 3: Laying Wire Downwards

Courtesy of BMW OF NORTH AMERICA, INC.