65 11 055 Removing and installing/replacing radio receiver (radio navigation or on-board monitor)

Unlock plug connections (1) and (2) and disconnect.

Release screw (3).

Feed out radio receiver (4) in direction of arrow and remove.

Fig 1: Feeding Out Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Metal tabs (1) of radio receiver (2) must be seated in mountings (3) of holder (4).

Fig 2: Identifying Radio Receiver Metal Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unscrew nut (1).

Remove holder (2) from radio receiver (3).

Fig 3: Removing Holder From Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.