64 11 750 Removing and installing heating control (heater)
Remove radio. See 65 11 030 REMOVING AND INSTALLING/REPLACING RADIO RECEIVER (BUILT-IN UNIT)
Press down rotary buttons.
Release screws and remove front panel towards rear.
Loosen screws (1).
Remove center fresh air grill. See 64 22 136 Removing and installing / replacing right fresh-air grill
Unlock retainers (2) and push control panel inwards.
Remove frame (3).
Unlock retaining clips and withdraw shaft.
Unlock retaining clips and unclip Bowden cable.
Feed out Bowden cable.
Disconnect plug connection (1).
Unlock retaining clips and pull out microswitch (2) in direction of arrow.
Remove heater controls.
Installation:
- Clip in microswitch with button (1) towards top.