54 12 211 Removing and installing complete glass slide/tilt sunroof (frame)
Remove headliner. See 51 44 001 REMOVING AND INSTALLING/REPLACING HEADLINER (WITHOUT SLIDE/TILT SUNROOF)
NOTE:
- Close glass slide/tilt sunroof lid.
- Move front seats backwards/downwards as far as possible.
- Remove glass slide/tilt sunroof with a second person helping.
Detach all water drain hoses (1).
Disconnect plug connection from glass sunroof drive.
Release screws (1) and remove glass sunroof frame (2).
Installation:
Tightening torque. Refer to SLIDE/TILT ROOF & CONVERTIBLE TOP - TIGHTENING TORQUES .
NOTE:
In production, the screws (1) are secured with the washers (2) by robots.
In hand assembly, the washers (2) are not fitted.
In hand assembly, the washers (2) are not fitted.