52 26 005 Removing and installing/replacing rear seat (through-loading system)

4-door models only: 

Unclip rear seat on left/right towards top.

For optional ext. seat heating only: 

1. Disconnect cable.

Lift out seat.

Installation: 

1. Feed belt buckles and lap belt (1) through intended openings into correct position.
   Fig 1: Unclipping Rear Seat On Left/Right Towards Top (4-Door Models Only)

   Courtesy of BMW OF NORTH AMERICA, INC.

2-door models only: 

Unclip rear seat on left/right towards top.

For optional ext. seat heating only: 

1. Disconnect cable.

Pull out seat (if necessary under armrests) towards front.

Installation: 

1. Feed belt buckles and lap belt through intended openings into correct position.
2. If necessary, make sure ISOFIX covers are correctly engaged.
   Fig 2: Unclipping Rear Seat On Left/Right Towards Top (2-Door Models Only)

   Courtesy of BMW OF NORTH AMERICA, INC.