63 99 076 Replacing lamp for left xenon light (saloon/sedan, touring)

WARNING: Follow instructions for handling light bulbs (exterior lights).

Up to 09/2001:

Detach cover for low beam (1) in direction of arrow.

Installation:

Ensure cover for low beam (1) and lug (2) are correctly seated.

Fig 1: Detaching Cover For Low Beam In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

From 09/2001:

Unlock cover for low beam (1) and remove.

If necessary, open cable holder (2) and screw off.

NOTE: Feed out cover for low beam (1) carefully so as not to damage components underneath.

Fig 2: Removing Cover For Low Beam

Courtesy of BMW OF NORTH AMERICA, INC.

All:

Turn ignition unit for xenon light (1) in direction of arrow and remove.

Turn retaining ring (2) in direction of arrow and remove.

Remove xenon lamp.

Installation:

Note type of bulb.

Fig 3: Removing Xenon Lamp

Courtesy of BMW OF NORTH AMERICA, INC.