51 43 201 Removing and installing or replacing trim for front left or right roof
WARNING:
Version with head airbag:
Follow safety instructions for working on cars with airbag systems,
refer to.51 00... Safety instructions for working on cars with airbag systems
Follow safety instructions for working on cars with airbag systems,
refer to.51 00... Safety instructions for working on cars with airbag systems
CAUTION:
Do not use sharp-edged tools to remove trim (risk of damage to head airbag).
Remove mucket from front roof pillar (A-pillar finisher).
Remove plate (1).
Release screws (1).
Lift out trim (2) at top (3) and remove towards inside/top.
Installation:
- Install screws (1) with washers.
- Tightening Torque. Refer to BODY EQUIPMENT - TIGHTENING TORQUES .