Checking overtravel at outside handle:

• Close rotary striker lock with a screwdriver,
• open rotary striker lock with outside door handle (1),
• outside door handle (1) must be able to open further by measurement (A),
• if measurement (A) is obtained, then OK.
• if measurement (A) is not obtained, readjust rotary striker lock and carry out overtravel check,
• if measurement (A) is still not obtained, you must replace door lock.

A min. 2 mm

Fig 1: Checking Overtravel At Outside Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Lift out lock (1) and detach Bowden cable (2) from fixture (3).

Remove Bowden cable nipple (4) from lever (5).

Fig 2: Removing Bowden Cable Nipple

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Turn linkage for safety button (1) and detach from lever (2).

Fig 3: Turning Linkage For Safety Button

Courtesy of BMW OF NORTH AMERICA, INC.