LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 330xi Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body Equipment - Repair >> Rear door Locks, handle >> 51 22 090 Removing and installing/replacing door lock in left or right rear door (from 09/00) >> Notes

51 22 090 Removing and installing/replacing door lock in left or right rear door (from 09/00): Notes

NOTE: The work is identical for all E46 4-door models from year of manufacture 09/2000.

A 4 mm A/F Allen key is required for adjustment.

Raise the door window.

Remove sound insulation on rear door. See 51 48... Removing and installing/replacing sound insulation in rear door, left or right 

Disconnect plug connection (1) on door lock (2).

Fig 1: Disconnecting Plug Connection On Door Lock
G03124405Courtesy of BMW OF NORTH AMERICA, INC.

Lever out Bowden cable (1) from holder (2) with screwdriver.

CAUTION: Do not bend holder (2).

Unhook Bowden cable nipple (3) from lever (4).

Fig 2: Unhooking Bowden Cable Nipple From Lever
G03124406Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove door lock (2) with linkage (3).

Installation: 

Insert linkage for locking knob through opening in inner door plate.

Do not bend linkage (3).

Replace screws (1).

Tightening torque. Refer to BODY EQUIPMENT - TIGHTENING TORQUES .

Fig 3: Removing Door Lock With Linkage
G03124407Courtesy of BMW OF NORTH AMERICA, INC.
CAUTION: Do not close door while installing door lock and cover. It is not possible to open the door when the adjusting screw is released.
Secure door against closing.

Installation: 

Left door lock of rear door:

Slacken adjusting screw (1) on door lock (2) (turn counterclockwise, as shown in illustration), the Bowden cable mount (3) can thus be moved.

Fig 4: Installing Adjusting Screw
G03124408Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Right door lock of rear door:

Slacken adjusting screw (1) on door lock (2) (turn clockwise, as shown in illustration), the Bowden cable mount (3) can thus be moved.

NOTE: The Bowden cable mount (3) is still shown in the illustration as lock lever (3), but is similar to that in Fig. R51 2807.
Fig 5: Installing Right Door Lock Of Rear Door
G03124409Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Lever out sealing cap (1).

Tighten down adjusting screw (2) on door lock and fit sealing cap (1).