51 47 065 Removing and installing/replacing finishing strip at front left or right entrance

Carefully lever out finishing strip (1) with special tool 00 9 318 (universal wedge) from clips (2) towards top.

Fig 1: Removing Finishing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, lever clips out of entrance with pliers (head of pliers surface-ground).

If necessary, replace damaged clips.

Fig 2: Removing Clips Out Of Entrance With Pliers

Courtesy of BMW OF NORTH AMERICA, INC.

Foam tape (1) must be fitted.

Push clips (2) onto finishing strip (3) and align.

Fig 3: Installing Clips Onto Finishing Strip

Courtesy of BMW OF NORTH AMERICA, INC.