54 12 497 Removing and installing / replacing wind deflector for glass sliding/tilting sunroof

Open glass sunroof lid.

Press down wind deflector (1).

Release screws (2).

Remove spring (3) on left/right and wind deflector (1).

Installation: 

1. Tightening torque. Refer to SLIDE/TILT ROOF & CONVERTIBLE TOP - TIGHTENING TORQUES .

Fig 1: Removing Spring On Left/Right & Wind Deflector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. If necessary, replace faulty spring (1) and screw (2).

Fig 2: Removing Faulty Spring & Screw

Courtesy of BMW OF NORTH AMERICA, INC.