52 26 080 Removing and installing/replacing backrest frame for rear seat (through-loading system) on left (Touring)

Remove/install head restraint, rear left. Remove/install lock for rear seat backrest, left. Remove/install actuator for rear seat backrest, left. Remove backrest cover with padding for rear seat, left. Remove inertia belt reel, rear center.

Unlock clips (1) of head restraint guide sleeve, pull sleeve out of guide.

Fig 1: Removing Head Restraint Guide Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws on armrest lock (1) and ski bag lock (2). Remove locks.

Lever out clip feet of ski bag cover at rear.

Fig 2: Releasing Screws On Armrest Lock & Ski Bag Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out clip feet of ski bag cover at rear.

Fig 3: Levering Out Clip Feet Of Ski Bag Cover At Rear

Courtesy of BMW OF NORTH AMERICA, INC.