61 62 100 Adjusting jet nozzle for rear window washer unit

NOTE: The spray must meet the contact point (1).

Fig 1: Identifying Dimensions For Adjusting Jet Nozzle For Rear Window Washer Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Adjustment measurements:

REAR WINDOW WASHER UNIT JET NOZZLE ADJUSTING DIMENSIONS

IMPORTANT: Do not insert any pointed objects in nozzle (risk of damage).

Mark contact point with crepe tape. Adjust jet nozzle with offset screwdriver (3.5 mm) in slot.

Fig 2: Adjusting Jet Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.