51 32 160 Removing and installing/replacing cover (anti-trapping protection) on door window frame, left or right, inside: Notes

Remove front door trim panel, refer to REMOVING AND INSTALLING LEFT OR RIGHT FRONT DOOR TRIM PANEL  .

Unfasten clips (1).

Fig 1: Unfastening Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out cover (1) towards inside, feed out from door brake (2) and detach from retainer (3).

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) for anti-trapping protection.

Fig 3: Disconnecting Plug Connection Of Anti-Trapping Protection

Courtesy of BMW OF NORTH AMERICA, INC.

Detach cover (1) from retainer (2) and remove rest.

Fig 4: Detaching Cover From Retainer

Courtesy of BMW OF NORTH AMERICA, INC.