Special tools required:

• 61 6 060

Take off cap.

Fig 1: Removing Wiper Arm Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten nut.

Installation: 

1. Observe tightening torque. Refer to GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE .
   Fig 2: Unfastening Wiper Arm Nut

   Courtesy of BMW OF NORTH AMERICA, INC.

Detach windshield wiper arm with special tool 61 6 060.

Fig 3: Detaching Windshield Wiper Arm With Special Tool 61 6 060

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check that sleeve (1) is firmly seated. If sleeve (1) is loose, it must be replaced. A sleeve (1) firmly seated in the windshield wiper arm can be reused.

Fig 4: Installing Sleeve In Windshield Wiper Arm

Courtesy of BMW OF NORTH AMERICA, INC.