61 31 295 Replacing clutch switch for cruise control system

Remove trim panel for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY

Press clutch pedal with pedal support down to flow and lock in position.

Disconnect plug connection (1).

Withdraw sleeve (3) in direction of arrow up to stop.

Press both retaining clips together at front end and pull out switch (2) in direction of arrow towards rear.

Installation: 

1. Slowly move clutch pedal to initial position.
   Fig 1: Replacing Clutch Switch For Cruise Control System

   Courtesy of BMW OF NORTH AMERICA, INC.