51 21 146 Replacing locks for simultaneous closing with EWS control module

Replace locks for simultaneous closing, refer to REPLACING LOCKS FOR SIMULTANEOUS CLOSING  .

Remove panel for pedals, refer to REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY  .

• Disconnect battery negative lead
• Disconnect plug connection on control module for electronic immobilizer and remove control module
• Install new control module
• Connect battery negative lead
  Fig 1: Connecting DIS Tester

  Courtesy of BMW OF NORTH AMERICA, INC.
• Connect DIS Tester or MoDiC III
• Select model
• Select coding program
• Read out data
• Code EWS control module
• Terminate coding program
• Carry out function check