Special tools required:

• 009317

Up to 09/2001: 

Lever out fog lamp insert (1) with special tool 00 9 317 and fold out in direction of arrow.

Installation: 

1. Feed detent lugs (1) into outer guide (2).
2. Clip inner fog lamp insert into retainer.
   Fig 2: Feeding Detent Lugs Into Outer Guide

   Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection and remove fog lamp insert.

Replacement: 

Adjust front fog lamps.

From 09/2001: 

Left side only: Remove outside temperature sensor.

Remove cover from front wheel housing. Disconnect plug connection (1). Release screws (2) and remove fog lamp insert (3) in direction of arrow.

Installation: 

Make sure ventilation grommet is laid without kinks and is sufficiently firmly seated.

Replacement: 

1. Adjust front fog lamps.
   Fig 4: Releasing Screws & Removing Fog Lamp Insert In Direction Of Arrow

   Courtesy of BMW OF NORTH AMERICA, INC.