Connector Pin Assignments
The 54-pin connector of the ULF Control Module utilizes the following pins on X01185
PINS DESCRIPTION
| PIN | Description |
|---|---|
| 1 | Microphone + |
| 11 | Cradle On/Enable |
| 15 | I-Bus |
| 17 | KL 30 |
| 19 | Microphone - |
| 21 | Microphone Shield |
| 22 | Hook |
| 27 | Programming |
| 28 | Programming |
| 32 | Cradle Key + |
| 33 | Telephone On |
| 34 | Telephone On (pin 33) |
| 35 | KL R (Ignition) |
| 36 | KL 31 (Ground) |
| 43 | Programming |
| 44 | Programming |
| 45 | Programming |
| 51 | Telephone Mute |
| 52 | KL 58g (illumination) |
The following pins on X4545 are utilized when the eject box is connected
PINS DESCRIPTION
| PIN | Description |
|---|---|
| 1 | Cradle Key + |
| 2 | KL 31 |
| 3 | 58G |
| 5 | KL 30 |
| 13 | Cradle On/Enable |
NOTE:
The pairing button used on the E46 only utilizes pin 1, 2 & 3 of X4545
ULF Wiring Schematic for the E53 with Boardmonitor
ULF Wiring Schematic for the E53 with Multi Information Display
ULF Wiring Schematic for the E39 with Boardmonitor
ULF Wiring Schematic for the E39 with Multi Information Display
ULF Wiring Schematic for the E46 with Boardmonitor
ULF Wiring Schematic for the E46 without the Boardmonitor