Special tools required:

• 64 1 020

Up to 09/2001: 

Lever out additional front turn signal lamp (1) with special tool 64 1 020 in direction of arrow.

Pull out additional front turn signal lamp (1) up to bulb holder, turn through approx. 90° and feed out.

Fig 1: Removing Additional Front Turn Signal Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

From 09/2001: 

Unclip additional front turn signal lamp (1) in direction of arrow and remove.

Fig 2: Unclipping Additional Front Turn Signal Lamp In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

All: 

Disconnect plug connection (1) and remove additional front turn signal lamp (2).

Fig 3: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.