63 21 183 Removing and installing/replacing left or right tail light (on rear lid)

Remove socket housing for rear light

Release nut slightly.

Press lock in direction of rear light housing and remove rear light towards outside.

Installation: 

Make sure rear light seal is correctly seated, replace if necessary.

Make sure there is a uniform gap all round between outer rear light and rear lid.

Fig 1: Removing Socket Housing For Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Attach outer detent lugs (1) to rear lid.

Fig 2: Attaching Outer Detent Lugs To Rear Lid

Courtesy of BMW OF NORTH AMERICA, INC.