63 12 950 Replacing a lower holder for headlight mounting

Remove headlight.

Release screws and remove lower holder.

Installation: 

Tighten screws hand-tight only.

Install headlight and align to engine hood.

Tighten down screws.

Fig 1: Installing Headlight & Aligning To Engine Hood

Courtesy of BMW OF NORTH AMERICA, INC.

Version with headlight cleaning system: Unclip clip for hose (1) and disconnect hose (2).

Fig 2: Unclipping Clip For Hose

Courtesy of BMW OF NORTH AMERICA, INC.