84 11 610 Removing and installing/replacing eject box (cordless keypad handset)

Unlock insert in storage tray (1) on both sides in direction of arrow and remove upwards from storage tray (2).

Fig 1: Storage Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Push foam insulation (1) back a little and disconnect plug connection (2).

Remove insert in storage tray (3).

Fig 2: Storage Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retainer (1) on both sides and remove eject box (2) in direction of arrow from insert in storage tray (3).

Fig 3: Storage Tray Unlock Retainer

Courtesy of BMW OF NORTH AMERICA, INC.