84 11 550 Removing and installing/replacing hands-free microphone

Special tools required:

Model without slide/tilt sunroof:

Lever out microphone trim (1) with special tool 64 1 020 in direction of arrow and remove.

Disconnect plug connection underneath.

Fig 1: Removing Microphone Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unclip hands-free microphone (1) and remove from microphone trim (2).

Installation:

Arrow (3) of hands-free microphone (1) and arrow (4) of microphone trim (2) point in driving direction.

Fig 2: Hands-Free Microphone Trim Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Version with slide/tilt sunroof:

Lever out microphone trim (1) with special tool 64 1 020 in direction of arrow and remove.

Disconnect plug connection underneath.

Fig 3: Removing Microphone Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unlock detent lug (1) and feed out hands-free microphone (2) in direction of arrow.

Installation:

Arrow on hands-free microphone (2) points in driving direction.

Fig 4: Hands-Free Microphone

Courtesy of BMW OF NORTH AMERICA, INC.