84 31 020 Removing and installing/replacing hands-free system speaker

Remove trim for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY

Disconnect plug connection (1).

Screw off threaded ring for speaker (2) in direction of arrow and remove hands-free system speaker (3) towards bottom.

Fig 1: Removing Hands-Free System Speaker

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure hands-free system speaker (1) is correctly positioned in panel for pedal assembly.

Fig 2: Hands-Free System Speaker

Courtesy of BMW OF NORTH AMERICA, INC.