11 13 Oil Pan
OIL PAN TIGHTENING TORQUE SPECIFICATIONS (1AZ - 2AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | All | M12 x 1.5 | 25 N.m. | |
| All | M18 x 1.5 | 35 N.m. | ||
| All | M22 x 1.5 | 60 N.m. | ||
| 2AZ Oil pan on engine block | All | M6 8.8 | 10 N.m. | |
| All | M6 10.9 | 12 N.m. | ||
| N40 / N42 / N45 / N46 | M8 8.8 | Replace screws | 30 N.m. | |
| All others | M8 8.8 | 22 N.m. | ||
| Oil sump, lower section to upper section | All | M6 8.8 | 10 N.m. | |
| All | M8 8.8 | 22 N.m. | ||
| Oil sump bottom section to top section with microencapsulated screws | All | M6 10.9 | Replace screws | 12 N.m. |