51 13 065 Removing and installing or replacing finisher on left or right headlight housing

Open hood.

Unclip clip (2) on trim (1) on inside.

Fig 1: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Press trim (1) downwards out of holder.

Feed trim (1) out of hook (3) and remove.

Installation: 

1. Mount (2) and hooks (3) and (4) of trim (1) must not be damaged.
Fig 2: Identifying Hooks
Courtesy of BMW OF NORTH AMERICA, INC.
2. Seal (5) must be correctly seated.