51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Remove bottom right trim panel from instrument panel. Refer to 51 45 181 REMOVING AND INSTALLING/REPLACING TRIM FOR INSTRUMENT PANEL, BOTTOM RIGHT .

Detach mucket (1) in area of side trim panel (2).

Fig 1: Removing Side Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip clips (3) towards interior.

Withdraw side trim panel (2) from entrance cover strip (4) and remove towards interior.

Installation: 

1. If necessary, replace faulty clips (1) in side trim panel (2).
   Fig 2: Replacing Faulty Clips

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert guide (1) of side trim panel (2) into slot in carpet.

Fig 3: Inserting Guide Of Side Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.