51 12 801 Replacing bracket for rear bumper at left or right

(bumper removed)

If necessary, remove rear bumper completely. Refer to 51 12 000 REMOVING AND INSTALLING COMPLETE REAR BUMPER .

Release screw (1) on wheel arch.

Fig 1: Releasing Screw On Wheel Arch

Courtesy of BMW OF NORTH AMERICA, INC.

Press together catches (2) and remove holder (3) outwards/forwards.

Installation:

Catches (1) and guides (2) must not be damaged.

Fig 2: Identifying Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove holder (2).

Fig 3: Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) on holder (2) must not be damaged.

Fig 4: Identifying Guides On Holder

Courtesy of BMW OF NORTH AMERICA, INC.