11 37 006 Removing and installing/replacing left eccentric shaft (N62 from 9/03): Notes

WARNING: This page is about a different variant/trim than selected.

(cylinder bank 5 to 8)

Remove servomotor for left eccentric shaft.

Remove ignition coils on cylinder bank 5 to 8. See IGNITION COIL .

Remove spark plugs on cylinder bank 5 to 8.

Remove left cylinder head cover .

Remove inlet and exhaust adjustment unit on left side.

Remove left inlet camshaft.

Eccentric shafts from 2/2003:

NOTE: Eccentric shafts of cylinders 1 to 4 and 5 to 8 are identical parts.

IMPORTANT: Note installation direction of eccentric shafts.
Depending on the side on which the magnet wheel is fitted, the eccentric shafts are used for cylinders 1 to 4 or 5 to 8.
Incorrect assembly will result in engine damage.