11 12 Cylinder Head with Cover
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER N62TU SPECIFICATION
| Cylinder head height: Original dimension | mm | 133.0 +/- 0.07 |
| Machining limit | mm | 132.7 +/- 0.07 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035-13.993 |