Body Cavity Sealing
WARNING: This page does not describe the selected car, but rather 100 other vehicles, including the 2010 BMW Z4, 2010 BMW X6 M, 2010 BMW X6, 2010 BMW X5 M, and 2010 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
It is only necessary to rewax or seal the affected area after repairing the body.
Only BMW approved products may be used to comply with the six year warranty against rust perforation. These products protect cavities effectively and permanently against corrosion. Their excellent coating and waterproofing properties let them flow into all inaccessible corners and folds for unsurpassed overall protection.
Underbody and Body Cavity Sealing Compound
For sealing of body cavities, such as doors, A-pillars, front, side and cross members, etc.
(Former BMW Part No. 81 22 9 407 479)
3M Part No. 8891
Wurth Part No. 892080
Also: Wurth "Brushable Seam Sealer", Part No. 8901021.