31 2 260 Pressure sleeve tool

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For removing and installing rubber mounts in tension and pressure struts and in control arms (E46/5)

Series: E38, E39, E46/5, E53, E83, E85, E86

Storage location: A35

SI number: 1 03 99(418)

Order number: 31 2 260

Pressure sleeve tool

Consisting of:

1 = 31 2 261 Thrust sleeve

Note: For bracing during removal and installation. Model series: E38, E39, E83 For removing and installing rubber mounts in control arms / model series: E46/5

In conjunction with: 31 2 134 (E46/5)

3 = 31 2 263 Thrust sleeve

Note: For removal and installation Model series: E38, E39

4 = 31 2 264 Thrust sleeve

Note: For removal and installation. Model series: E53, E83

Fig 1: Pressure Sleeve Tool (31 2 260)

Courtesy of BMW OF NORTH AMERICA, INC.