Minimum set: Mechanical tools
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
In conjunction with: 33 4 450
NOTE:
For removing and installing camber arm rubber mount on rear axle carrier.
Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: B49, C49
SI number: 1 15 04 (117)
Order number: 33 4 460
Set of tools
Consisting of:
1 = 33 4 461 Draw-in disk
2 = 33 4 462 Pull-out disk
3 = 33 4 463 Counter support
4 = 33 4 464 Support sleeve
5 = 33 4 465 Spindle 205 mm, M12
6 = 33 4 466 Pressure nut