Minimum set: Mechanical tools
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
In conjunction with: 33 3 220, 00 8 550, 33 3 110
NOTE:
For removing and installing front/rear rubber mounts in rear axle carrier
Series: E36, E46, E70
Storage location: C12
SI number: 1 10 90(288)
Order number: 33 3 320
Threaded spindle (tool kit)
Consisting of:
1 = 33 3 321 Shaped piece
NOTE:
For removing rear rubber mount from rear axle carrier Model series: E36, E46
In conjunction with: 33 3 107, 00 8 550
2 = 33 3 322 Thrust washer
NOTE:
For installing front/rear rubber mounts Model series: E36, E46
In conjunction with: 00 8 550, 33 3 103, 33 3 104, 33 3 107, 33 3 314, 33 3 315
3 = 33 3 323 Shaped piece
NOTE:
For removing front rubber mounts from rear axle carrier Model series: E36, E46
In conjunction with: 00 8 550, 33 3 324
4 = 33 3 324 Spindle
NOTE:
For removing front rubber mount Model series: E36, E46