Minimum set: Mechanical tools
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
In conjunction with: 31 3 340 and 31 3 360
NOTE:
For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.
Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56
Storage location: Single
SI number: 1 11 99 (438)
Order number: 31 3 350
Spring holder
Consisting of:
1 = 31 3 351 Spring retainer (2 x)
NOTE:
For use only with repair instructions
2 = 31 3 352 Spring retainer (2 x)
NOTE:
For use only with repair instructions
3 = 31 3 353 Spring retainer (2 x)
NOTE:
For use only with repair instructions
4 = 31 3 354 Spring retainer ring
NOTE:
For use only with repair instructions
5 = 31 3 355 Spring retainer
NOTE:
For use only with repair instructions
6 = 31 3 356 Centering ring
NOTE:
For use only with repair instructions
7 = 31 3 357 Spring retainer (2 x)
NOTE:
For use only with repair instructions.
In conjunction with: 31 3 340
8 = 31 3 381 Spring retainer ring
NOTE:
For use only with repair instructions.
9 = 31 3 382 Spring retainer
NOTE:
For use only with repair instructions.
10 = 31 3 358 Insert ring
NOTE:
For use only with repair instructions. For insertion in spring retainer ring 31 3 354. Model series: E87
11 = 31 3 383 Spring retainer
NOTE:
To be used with repair instructions only.